| Jerseys by Teamco (formerly Jerico) |
The majority of our NHL in-stock
mesh and air knit jerseys are made by Teamco Sportswear
(formerly known as Jerico). Below are some close up shots and some features of these
jerseys.
| Mesh |

| - 100% Polyester Heavyweight
Mesh - Reinforced Shoulders (2 Layers) - Reinforced Elbows (3 Layers) - Reinforced Seams |
- Cover Stitched Striping - Generous Sizings - Generous Goalie Cut - Single Colour Mesh Collars |
| Air Knit |
![]() |
Features - 100% Polyester Heavyweight air knit |
| Goalie |
From the photo below you'll note that an arm
gussett is added between the sleeve and the body to allow
for your extra equipment. Couple that with an already large shirt and you've got a very
spacious goalie jersey.

| Chest | Length | Armhole | Sleeve Length | Cuff |
| 58 | 34 | 34 | 20 | 14 |
| Teamco Sizes | ||||||||
| Sizes | Youth S/M | Youth L/XL | Adult S | M | L | XL | XXL | Goalie |
| Chest Size (in inches, around) | 36 | 39 | 42 | 46 | 52 | 55 | 58 | 58 |
| Length (from shoulder to hem) | 24 | 25 | 28 | 30 | 31 | 31 | 34 | 35 |
| Armhole (in inches, around) | 20 | 21 | 23 | 26 | 26 | 26 | 28 | 34 |
| Sleeve length (from armpit to cuff) | 18 | 18 | 21 | 21 | 21 | 21 | 21 | 20 |
| Cuff (in inches, around) | 11 | 11 | 13 | 14 | 14 | 14 | 14 | 14 |
*****Please note that the cutting and sewing of hockey jerseys is not always precise. Sizes may vary an inch or two in either direction (smaller or larger).***** |
||||||||
| Measurement Guide |
*****Please note that the cutting and sewing of hockey jerseys is not always precise. Sizes may vary an inch or two in either direction (smaller or larger).*****
The jerseys are measured in inches in the following manner:
Chest size: measured around the body.
Length: measured from the top of the shoulder to the bottom of the
hem.
Armhole: measured from the armpit to the shoulder, around. In other
words it is the amount of space you have to get your arm into the sleeve.
Sleeve Length: measure from the armpit to the cuff.
Cuff: measured around the opening.